Views: 0 Author: Site Editor Publish Time: 2019-06-24 Origin: Site
Today, agriculture water storage tanks are widely used in agriculture, farming, transportation and other fields.
Water bladders and traditional water storage container are essentially different. Water storage bags can be customized for various types. It replaces the heavy, rust-prone and short-lived iron buckets in the past. The road surface is not good and it hurts the body and prolongs life. It will not be used normally due to seasonal changes during use.
Agriculture water storage tank can be folded and stored when not in use, reducing the occupied space. It has good sealing and corrosion resistance. It is made from reinforced material with anti-corrosion, anti-freeze, anti-oxidation and anti-ultraviolet. It is not affected by seawater, chemicals, chemicals, oil stains, acid and alkali and aquatic organisms: no pollution, no damage. The environment is an environmentally friendly product.
Water storage bags must prepare before filling. Check for damage, select qualified containers, clean the inside of the container, nails and sharp objects on the wall, handle the rough surface of the seal, and lay corrugated paper.
After completion, move the liquid bag to the container for use, the valve is facing up, and install the baffle. Each steel pipe and baffle must be locked with a cable tie, connected to the feeding pipe and the lifting pipe is fixed and fixed. In the later stage of filling, the flange of the valve flange is damaged, and the loading is started. Until it is installed, the whole process needs to be taken care of and the goods are closed. The right door of the container is closed, a warning sign is attached to the left door, and the transportation company is added. The seal is safely delivered to the destination.
The film formation process of the water storage bag is completed by the fusion between the emulsion particles. After the film formation, the inter-molecular gap is larger, and the coating film is relatively loose. The solvent-type rubber water bladder relies on the polymer molecules in the solvent evaporation process. In the process of depositing a film, the molecules are relatively tight and the voids are also small.
If you are interested and want more information. Do not hesitate to contact us. We will reponse to you as soon as possible.